CANCEL
The dual-network application of double-plate and double-station fast screen changer is applied at the same time, and the material flow is not interrupted when changing the screen, so as to achieve non-stop screen change.
The dual-network application of double-board and double-station fast screen changer can be used at the same time, one network works and one network is replaced when changing the network, without interrupting the material flow, and can achieve non-stop network change. Ensure that the two filter units work at the same time, and its filter area is twice that of a single net. Suitable for all polymer extrusion production requirements. The screen changing process is constantly filtered, which will not cause obvious fluctuations in the production of the extruder and improve the stability of product quality. It can withstand high melt pressures. Reliable sealing structure improves sealing effect.
The double-plate double-station quick screen changer automatically compensates for the sealing gap, which is resistant to high temperature, high pressure, no leakage, and has a large filtration area, which is suitable for high-output equipment. The screen changer does not stop when it does not stop, which can increase output and save energy consumption. It is easy to change the screen and easy to operate and maintain. It is widely used in extrusion production lines such as granulation, pipes, plates, sheets, cast films, etc.
| output | size(mm) | screen size | Hcating tube | ||||||
L1 | L2 | L3 | L4 | diameter (mm) | area (cm²) | quantity | voltage (v) | Heating power (w) | ||
HK-DSP-80 | 110~300 | 140 | 775 | 220 | 330 | Ф80 | 50x2 | 6 | 230/400 | 1200/1700 |
HK-DSP-100 | 180~500 | 170 | 895 | 250 | 400 | Ф100 | 78x2 | 6 | 230/400 | 1600/2000 |
HK-DSP-120 | 350~800 | 200 | 1005 | 310 | 470 | Ф120 | 113x2 | 6 | 230/400 | 2000/2400 |
HK-DSP-150 | 450~1200 | 245 | 1170 | 350 | 560 | Ф150 | 176x2 | 6 | 230/400 | 2400/3000 |
HK-DSP-180 | 500~1500 | 290 | 1335 | 440 | 600 | Ф180 | 254x2 | 6 | 230/ 400 | 4000/4800 |
HK-DSP-200 | 800~2500 | 320 | 1455 | 450 | 670 | Ф200 | 314x2 | 8 | 230/400 | 4500/5300 |
HK-DSP-250 | 1400~3700 | 395 | 1760 | 490 | 760 | Ф250 | 490x2 | 8 | 230/400 | 5000/6000 |
Note: The actual output depends on material fiowabilit fiter fineness and material purity. Specfications are subject to chang witout prior notice
Melt pumps have the advantages of compact structure, simple manufacturing process, low cost, and insensitivity to oil contamination, and are widely used. However, due to defects or improper maintenance in manufacturing, assembly, operation, and maintenance, the pump will often be damaged prematurely......
The melt metering pump is mainly installed at the outlet of the extruder for metering and pressurizing various melts. The advantages of the melt metering pump are safe and reliable operation, stable performance, long service life and low operating costs. The extruder melt metering pump is a positive......
Theoretical displacement of melt pumpThe volume of melt discharged per revolution is called the theoretical displacement of the melt pump, or pump displacement, and its unit is cc/r or cm³/r. The specifications of melt pumps are generally expressed in terms of displacement.Theoretical flow rate of m......
If you have any questions or concerns, you can contact us by leaving a message.
