CANCEL
Heiko company uses a new concept to design and manufacture high-performance automatic cleaning melt filter products
◆ Heiko company uses a new concept to design and manufacture high-performance automatic clean melt filter products, using advanced laser process processing technology, to achieve filtration of pollutants without the use of filter screens, and then assist in the use of special special scrapers to fully scrape the material, clean and thorough scraping of impurities and pollutants, to achieve automatic slag discharge, efficient filtration and removal of pollutants, widely used in all kinds of waste and post-consumer recycled plastics large-output coarse filtration process.
Performance characteristics:
◆ On-line filtration, no need to change the screen
◆ High production capacity, automatic slag discharge
◆ Large filtration area, efficient filtration of pollutants
◆ Smooth melt pressure
◆ Tight sealing structure type
◆ Very low material loss
◆ Long-lasting stable performance
Scope of application
◆ It is widely used in the large-output coarse filtration process of various post-consumer recycled plastics.
◆ Widely used in XPS extruded plastic board, granulation, sheet plate, pipe, etc.
Product model | yield (Kg/h) | Filter diameter (mm) | Filtration accuracy (meshes) | Pressure-resistant (MPa) | Drive power (KW) | Discharge Power (KW) | Heating power (KW) |
HK-DR-2N-300 | 300—500 | 300×2 | 10—100 | ≤35 | 3 | 1.1 | 18 |
HK-DR-2N-350 | 400—1000 | 350×2 | 10—100 | ≤35 | 4 | 1.1 | 21 |
HK-DR-2N-400 | 500—1200 | 400×2 | 10—100 | ≤30 | 4 | 1.1 | 25 |
HK-DR-2N-500 | 1000—2000 | 500×2 | 10—100 | ≤30 | 5.5 | 2.2 | 30 |
HK-DR-2N-700 | 2000—3500 | 700×2 | 10—100 | ≤30 | 7.5 | 2.2 | 42 |
Melt pumps have the advantages of compact structure, simple manufacturing process, low cost, and insensitivity to oil contamination, and are widely used. However, due to defects or improper maintenance in manufacturing, assembly, operation, and maintenance, the pump will often be damaged prematurely......
The melt metering pump is mainly installed at the outlet of the extruder for metering and pressurizing various melts. The advantages of the melt metering pump are safe and reliable operation, stable performance, long service life and low operating costs. The extruder melt metering pump is a positive......
Theoretical displacement of melt pumpThe volume of melt discharged per revolution is called the theoretical displacement of the melt pump, or pump displacement, and its unit is cc/r or cm³/r. The specifications of melt pumps are generally expressed in terms of displacement.Theoretical flow rate of m......
If you have any questions or concerns, you can contact us by leaving a message.
