CANCEL
The F series barrel pumps are specially designed for conveying, pressurizing and metering drums of various viscosities
The F series barrel pumps are specially designed for conveying, pressurizing and metering drums of various viscosities. The use of special materials of construction, the setting of face clearances and the selection of other options make the pump suitable for a wide range of production lines with drums.
|
pressure |
<100Bar |
|
rotate speed |
<600r/min |
|
viscosity |
<100000Cps |
|
temperature |
-18-200℃ |
|
Pump casing material |
304，316L |
|
Shaft material |
440C，2205，2507，Cr12 |
|
seal |
Mechanical seals, packing seals, magnetic seals |
|
D-sleeve material |
440C, Cr12, graphite, silicon carbide |
|
Static sealing |
Fluoroelastomer, perfluoroese, pertetrafluoro |
|
Typical Applications |
Silicone rubber, natural rubber, silicone sealant, structural rubber, AB rubber, butyl rubber |
Melt pumps have the advantages of compact structure, simple manufacturing process, low cost, and insensitivity to oil contamination, and are widely used. However, due to defects or improper maintenance in manufacturing, assembly, operation, and maintenance, the pump will often be damaged prematurely......
The melt metering pump is mainly installed at the outlet of the extruder for metering and pressurizing various melts. The advantages of the melt metering pump are safe and reliable operation, stable performance, long service life and low operating costs. The extruder melt metering pump is a positive......
Theoretical displacement of melt pumpThe volume of melt discharged per revolution is called the theoretical displacement of the melt pump, or pump displacement, and its unit is cc/r or cm³/r. The specifications of melt pumps are generally expressed in terms of displacement.Theoretical flow rate of m......
If you have any questions or concerns, you can contact us by leaving a message.
